Model Number: ZYB- 80/ CF13003-A
Brand Name: Galaxy / Yinhe
Key Specifications/Special Features:
ZYB- 80 Truck Fuel Pump with nozzleUsed for pumping light oils such as diesel or kerosene for vehicles, construction sites, farms and outside applications or other for other fuel powered equipmentUses an electric motor, vane oil pump, flow meter and computation meterConvenient, reliable, easy to operate and simple to maintain
It displays the amount of fuel pumped per job and has a total lifespan of service count
Manual wheel is used to zero out each pumping job
Remark: this oil pump is intended for non-commercial use
Product specifications:
- Pumpflow rate: 20 to 60L/minute
- Meterflow rate: 20 to 120L/minute
- Voltage: 220V AC ±10%, 50/60Hz or 110V AC ±10%, 60Hz
- Maximum working pressure: 3 bar
- Meter accuracy: ±1%
- Motor parameter:
- Turning speed:1400rpm
- In-out:
- Digits: 4, maximum 9999.9L, 8-digit accumulated
-
Environment condition:
- Temperature: -25 to 55℃
- Relative humidity: 30 to 90%
- High atmospheric pressure: 86 to 106kPa
| Common Troubleshooting |
| Fault Appearance |
Main Reason |
Fault Resolution |
|
1.Power cable is not plugged-in |
1.Check the electric cable |
| 2.Motor has jammed |
2.Replace the motor |
| 3.Capacitor failure |
3.Replace capacitors |
- Motor turns but no oil output
|
1.Suction side not submerged in oil |
1.Check the oil suction hose/pipe |
| 2.Vanes worn or gear damaged |
2.Replace vanes or gear |
- Abnormal metering or no meter output
|
1.Computation swing tray has broken |
2.Replace the copulation swing tray |
|
1.Plugged strainer |
2.Clean strainer |
By certification [File Integrity]
